Maintenance
Programming Wireless Wall Station(s) Or Transmitter(s) to Opener
DURING PROGRAMMING THE GARAGE DOOR MAY OPERATE. KEEP PEOPLE AND OBJECTS
CLEAR OF THE MOVING DOOR TO PREVENT DOOR DAMAGE OR POSSIBLE PERSONAL INJURY .
NOTE:
Programming failure can occur if the wall station or transmitter is too close to the opener during the programming
sequence. There must be a minimum of 6 feet between the wall station/transmitter and the opener.
NOTE:
The opener can be activated by up to 8 remote transmitters, 2 wall stations and 2 Keyless entries. If a 9th remote
is programmed, the first remote programmed will be lost from memory. The same is true if a third wall station or a third
Keyless entry is programmed, the first will not longer be in memory and will not operate the opener..
NOTE:
Do not press any button on the wall station or transmitter until instructed.
TRANSMITTER:
1. Press and hold the LEARN button located on the
garage door opener. The red Right LED on the opener
unit will turn on and remain lit for 15 seconds,
indicating activation of the learn mode.
2. Press one of the buttons on the transmitter you wish to use to operate the door.
The red Right LED on the garage door opener will turn on and off three times
indicating a successful learn.
3. Press the same button on the transmitter once more to confirm operation.
The opener will turn on and move the door. At this point you will be able to
activate the opener.
WIRELESS WALL STATION:
1. Press and hold the LEARN button located on the garage door opener.
The red Right LED on the opener unit will turn on and remain lit for 15 seconds,
indicating activation of the learn mode.
2. Press the light On/Off button on the Wall Station. The red Right LED on the
opener will turn on and off three times indicating a successful learn.
3. Press the light on/off button on the Wall Station once more to confirm
operation. The overhead light on the garage door opener will toggle from on
to off and from off to on. At this point you will be able to activate the opener.
To
Op
e
rat
e D
oo
r
Press
Here
Large
Button
Light
Button
34
WARNING
LEARN
Button
Center
LED
(Limit/Force
set-up)
DOWN
Button
UP
Button
Right
LED
(Learn
indicator)