66
Installation Procedure, LXE Model 6720 AP (non-RoHS)
NEMA Type 4 Enclosure Reference Guide
E-EQ-NEMARG-F
159087-0001 Rev. C
Page 6 of 8
13. Place a nylon tie down over the screw holes of the brackets. See figure 6.
14. Secure the tie downs and the bracket with three (3) 6-32x 5/16” long screws.
15. Route the power cord from the Power Injector between the Power Brick and
the Power Injector and secure the ferrite with a nylon cable tie. See Figure 7.
16. Route the power cord around the top of the Power Brick.
17. Bundle it and secure it with a nylon cable tie on the
LEFT
side of the Power
Brick. See figure 7.
18. Connect the Ethernet Cable (supplied with the AP) to the Power Injector and
the AP. See figure 8.
Figure 8
Data cable
Supplied with
AP
Figure 7
