YA
LI P
A
R
A
D
A - Y
A
LI R
A
M
O I
N
ST
A
LL
AT
IO
N A
N
D O
PE
R
AT
IN
G M
A
N
U
A
L
201
8-
02
-01
FROST PROTECTION MODE
This mode is to be used when the house is unoccupied for
extended periods of time.
Default value: 7.0°C
STANDBY MODE
In this mode the radiator is switched off and the word
“
OFF
” will be shown on the LCD display.
• The radiator will no longer receive signals from a wired
programmer.
• At any time you can check the measured room
temperature by pressing the “
OK
” key twice.
ATTENTION:
Please be aware, if there is no heating in your
property then your pipes could freeze. For the protection
of product and property in very low temperatures we
recommend the “frost protection” mode is used.
ATTENTION:
In this mode the radiators are still connected to
the electrical supply.
PROGRAM SELECTION MODE
NOTE:
If connected to the LVI Touch E3, it is not possible
to enter into the program selection mode as the clock
symbol is made unavailable.
SELECTING A PROGRAM
• Use the “
+
” or “
–
” keys to select one of the preset programs,
d1 to d9 (picture 6), or one of the user definable programs,
U1 to U4. The program number will blink. The program
sequence for the current day is displayed along the bottom
of the screen. Press the “
OK
” key to confirm the program to
be followed.
• When confirmed, the control will return to Automatic.
DEFINING A USER PROGRAM
NOTE:
Once saved, the user defined programs are not lost
in the event of a power cut. However, the time will reset to
00:00 and day 1 when the power returns, if not set, so the
product may not heat at the expected times.
• Use the “
+
” or “
–
” keys to select a user definable program,
U1 to U4, to be modified, then press and hold the “
OK
”
key for 3 seconds.
NOTE:
If a user defined program has already been created
and saved, it will be overwritten when the newly defined
user program is saved.
34
GB
GENERAL
INFORMATION
