LV switch SIP-T780 User Manual Download Page 63

Page: 63 / 117

4.6 System customization

4.6.1 Account management

T780 can register SIP accounts, up to 2 accounts, and make calls through

the registered SIP accounts. Dual accounts can make multiple calls at the

same time, and switch the account to use by pressing the account key.

4.6.1.1 Account Register

- Register an account through the phone interface

1.Press Menu -> Settings -> Advanced Settings (password：admin) ->

Account.

2.Press

to select the account to be configured, and press

the Enter soft key to enter the configuration interface

3.The account status can be enabled or disabled by switch the soft key

4.Press

to select display name, user name, registered name,

password, SIP server 1 address, registered server port,SIP server

2,outbound proxy server,and NAT status etc.

5.Change the transmission mode by switching the soft key: UDP or TCP

6.Press the Save soft key to save the account.

Summary of Contents for SIP-T780






















































































































Search results

Summary of Contents for SIP-T780

Reviews:

Related manuals for SIP-T780

Brands by name

Popular brands

LV switch SIP-T780, User Manual

Search results

Summary of Contents for SIP-T780

Reviews:

Related manuals for SIP-T780

Brands by name

Popular brands