LV switch SIP-T780 User Manual Download Page 46

Page: 46 / 117

SIP-T780 IP Phone User Manual

4.3.1.5 Edit contact

- Edit contacts via phone interface

1. Press the Dir soft key in standby mode (or Menu -> Directory ->

Local Directory) -> All Contacts.

2.Press

to select the person name needed to be edit.

3.Press soft key option-> details,enter into the edit page of the

contact.

4.Press

to edit the contact information.

5.Press OK to save the editing operation

- Edit contacts via web browser

1.Log in to the phone page by IP address.

2.Click Directories（B）->Address list（x).

3.Click the contact you want to edit in the contact list below, and the

information will be filled in the local contact module.

4.Modify the contact information in the local contact module.

5.Click the edit button to save the editing operation.

Summary of Contents for SIP-T780






















































































































Search results

Summary of Contents for SIP-T780

Reviews:

Related manuals for SIP-T780

Brands by name

Popular brands

LV switch SIP-T780, User Manual

Search results

Summary of Contents for SIP-T780

Reviews:

Related manuals for SIP-T780

Brands by name

Popular brands