LV switch SIP-T780 User Manual Download Page 51

Page: 51 / 117

the phone book and organization chart of company employees, and it is

especially convenient for querying information.

For example: According to the tree structure, the root of the tree is the

company name, and each department can be logically branched underneath, and

each employee can be branched out under the department, and contacts can be

retrieved within a certain range according to specific rules, such as the name

of a company’s hardware department. Including "J" employees, etc.

You can configure the phone to connect to an LDAP server that supports LDAPv2

or LDAPv3. The phone supports the following LDAP servers:

Microsoft Active Directory

Sun ONE Directory Server

Open LDAP Directory Server

Microsoft Active Directory Application Mode (ADAM)

The biggest advantage of LDAP is that users can quickly find contacts from

the LDAP server, without the need to maintain a local phone book. The contact

information returned by the LDAP server is read-only. Users can call LDAP

contacts but cannot add, edit or delete LDAP contacts. The administrator can

configure LDAP query filter conditions on the phone, such as the number of

contacts displayed, the information returned, and how to sort contacts. How to

perform LDAP search on the SIP-T780 series IP phone:

Directly enter the search content on the pre-dial/dial interface (make sure

that LDAP is enabled for the outgoing contact matching list), and the phone

will query from the LDAP server. If there is a result, it will be displayed on

the LCD interface, and the user can select a contact and initiate a call.

Press the LDAP programmable button or press Menu->Contacts->LDAP, and enter

the content to be searched in the LDAP search interface. The phone will query

the relevant contacts from the LDAP server and display them on the LCD

interface. The user can select one Contact and initiate a call, or add the

contact to the local address book or blacklist.

The phone sends a search request to the LDAP server. The LDAP server

searches for all contacts based on the entered search content and configured

filter conditions, and then returns the matching results to the phone.

4.3.3.2 Configure LDAP server

The following example is for reference only. You can modify the LDAP

attribute value according to your specific needs.

1. Open the web interface and login

2. Click Directory->LDAP

3. Configure LDAP parameters as following:

Summary of Contents for SIP-T780






















































































































Search results

Summary of Contents for SIP-T780

Reviews:

Related manuals for SIP-T780

Brands by name

Popular brands

LV switch SIP-T780, User Manual

Search results

Summary of Contents for SIP-T780

Reviews:

Related manuals for SIP-T780

Brands by name

Popular brands