LV switch SIP-T780, User Manual

Page: 62 / 117

SIP-T780 IP Phone User Manual
62
The configuration and status can be made more simple and convenient through
the setting of the web page. When setting the web page, the following points
must be determined:
(1)Connect the computer and the IP phone connected to the expansion station to
the same network. If there is no network interconnection device, you can
directly connect the computer to the PC port of the IP phone through a
straight-through cable;
(2)Ensure that the phone is running normally, check the IP address of the phone;
(3)Enter the phone IP address in the address bar of the browser;
(4)Enter the administrator user name and password and enter the web
configuration page. The default administrator user name is admin and the
default password is admin;
(5)Click "DSSKEY(D)"> "Ex Module" in the left navigation bar to open the
extended station settings page.
as the picture shows:
-Set the expansion module
1. Select the expansion module n you need to configure;
2.Select the buttons you need to configure (for the specific button sequence,
please refer to the Expansion Station Overview-Buttons and Hardware chapter);
3.Select each parameter, set and modify:
* Type: According to whether you need to use the BLF function, the button mode
can be divided into two types:
* BLF: Set the key to support BLF function and speed dial;
* Speed dial: set this key to support speed dial only。
* Account: Select the outgoing SIP account associated with this key, that is,
which SIP account is used to call this number or function code;
Label: Set the name description of the key;
*Value : Set the number for speed dialing of the key or the function code to
realize a certain function of a certain server.
Extension:For call pickup, fill in the pickup feature code + extension number.
For the pickup feature code, please consult the server manufacturer's
documentation.
4. Click the Confirm button to save.