SIP-H680 Series IP Phone User Manual
ignore all multicasts, the range is 1-31. For example, if the priority is set to 1, the multicast with priority 2-31 is
ignored.
2.
Penetrate DND:
If the phone is enabled to penetrate DND, priority is 3; when
the phone is enabled in the DND mode, multicasts with a priority greater than or equal to three can be
answered normally;
3.Paging priority
: If you enable paging priority, when the phone is listening to
the multicast RTP stream with priority 5, at this time the multicast RTP
stream with priority 3 is sent, and the phone will automatically receive priority
3 Multicast RTP stream.
6.1.2 Accept multicast RTP stream
You can set the phone to receive the multicast RTP stream sent from the pre-configured multicast
address. The multicast process does not involve SIP signaling. Up to 31 different multicast addresses
can be configured to monitor on the phone.
1.
Paging intervention:
If there is multicast during the call, if the current
multicast priority is lower than the call priority, the phone will automatically ignore the multicast; disable it to
ignore all multicasts, the range is 1-31. For example, if the priority is set to 1, the multicast with priority 2-31 is
ignored.
2.
Penetrate DND:
If the phone is enabled to penetrate DND, priority is 3; when
the phone is enabled in the DND mode, multicasts with a priority greater than or equal to three can be
answered normally;
3.Paging priority
: If you enable paging priority, when the phone is listening to
the multicast RTP stream with priority 5, at this time the multicast RTP
stream with priority 3 is sent, and the phone will automatically receive priority
3 Multicast RTP stream.
- Set the monitored multicast address through the web page:
1.Click Directory ->Multicast IP.
2.Select the appropriate value from the pull-down list of Paging Intervention.
3.Select Enabled from the pull-down list of Paging Priority.
4.Enter the monitored multicast address in the listening address field: IP address and port number (for
example: 224.5.6.20:10008).
5.(Optional) Enter a label in the label area. When receiving a multicast RTP stream, the LCD interface
will display the multicast label.
6.Select the corresponding channel in the channel drop-down box, the default is 0.
