LV switch SIP-H680 Series User Manual Download Page 15

Page: 15 / 118

SIP-H680 Series IP Phone User Manual

2. Notes for safe use

Please read the safety instructions carefully before installing and using the phone to ensure safe and convenient

use of the phone!

Please use the power adapter specified by the product (supplied with the package).If you need to use the

power adapter provided by other manufacturers due to special circumstances, please confirm that the voltage

and current of the provided adapter comply with the specifications of this product (see the connection of power

supply and network cable for details), and it is recommended to use safety certified products, otherwise it may

cause damage to the equipment or may even cause a fire or electric shock. Before using this product, please

check whether the power cord is damaged. Do not use damaged power cords and abnormal conditions such as

twisted, stretched, or bundled power cords to avoid fire and electric shock.

Non-technical service personnel must not disassemble or repair the product by themselves. Improper

installation or repair may cause electric shock, fire and other accidents. At the same time, the warranty service

of your product will also be invalid. If you need technical support, please contact the agent or your network

administrator .

Keep the temperature and humidity of the product in line with the working requirements of the product. Make

sure that the product is placed flat on the workbench, and check that the non-slip glue on the product base

does not fall off and cause the phone to slide on the platform. Please keep away from electrical appliances with

strong magnetic or electric fields, such as microwave ovens or refrigerators, when placing the equipment. Keep

the equipment away from fire sources.

Do not put metal objects such as pins and iron wires into vents or gaps. Otherwise, it may cause electric shock

and other injury accidents caused by current passing through metal objects. If similar metal objects fall into the

product, stop using it in time.

This product contains small parts inside. When placing the device, keep it out of the reach of children to avoid

accidentally swallowing small parts.

If you need to clean the phone, please cut off the power, wipe with a dry cloth, and place it in a ventilated place

to dry naturally after cleaning. The power adapter needs to be kept dry and clean, otherwise accidents may

occur.

Summary of Contents for SIP-H680 Series























































































































Search results

Summary of Contents for SIP-H680 Series

Reviews:

Related manuals for SIP-H680 Series

Brands by name

Popular brands

LV switch SIP-H680 Series, User Manual

Search results

Summary of Contents for SIP-H680 Series

Reviews:

Related manuals for SIP-H680 Series

Brands by name

Popular brands