LV switch SIP-H680 Series User Manual Download Page 4

Page: 4 / 118

SIP-H680 Series IP Phone User Manual

6.6.3 Web page configuration description.............................................................................121

6.7 Trusted Certificates..................................................................................................................122

Copyright

Without the express written permission of LVswitch (Guangdong) Information Technology Co., Ltd., no unit or individual may

copy, copy or translate part or all of this manual without authorization.

It shall not be used in any form or any method (electronic, video, printing or other methods) for commercial purposes, profit

purposes, and LVswitch (Guangdong) Information Technology Co., Ltd. will not bear any responsibility for any property or other

losses caused by illegal actions.

When this document is used for network dissemination, the company allows users to download or print it for private use.

Guarantee

The product specifications and consultations mentioned in this manual are for reference only, and will not be notified if the

content is updated. Unless there is a special agreement, this manual is only used as a guide, try to provide the most accurate

statements, information and suggestions, and does not guarantee any express or implied structure. The user shall bear full

responsibility for the application of the product.

LVswitch (Guangdong) Information Technology Co., Ltd. does not make any guarantees for this guide, including but not limited to

implied merchantability and special purpose guarantees. LVswitch (Guangdong) Information Technology Co., Ltd. shall not be

liable for any indirect or incidental losses caused by incorrect use of this guide.

Statement

CE mark

This device complies with the European Union's safety directive 2014/35/EU and electromagnetic compatibility directive 2014/30/EU.

Part 15 of FCC Regulations

The device complies with Part 15 of the FCC regulations. The following two requirements should be followed when working.

This equipment complies with the basic requirements of CE, FCC

and other relevant regulations. You can view the CE and FCC

information on the label on the back of the phone.

Summary of Contents for SIP-H680 Series























































































































Search results

Summary of Contents for SIP-H680 Series

Reviews:

Related manuals for SIP-H680 Series

Brands by name

Popular brands

LV switch SIP-H680 Series, User Manual

Search results

Summary of Contents for SIP-H680 Series

Reviews:

Related manuals for SIP-H680 Series

Brands by name

Popular brands