LV switch SIP-H680 Series User Manual Download Page 38

Page: 38 / 118

SIP-H680 Series IP Phone User Manual

2.Press Directory

•

->Local contact

•

••

3.Add a contact or click a contact in the list to edit it.

4.Select a ringtone for the contact from the ringtone selection box.

5.If you want to add a contact, click the Add button, if you want to modify a contact, click the Edit button.

4.2.3 Button sound

The phone will emit a key tone when pressing the keyboard key to indicate that the key has been

triggered. The key tone can be enabled or disabled by setting.

-Set button sound via phone interface.

1.Press Menu

->Settings->Basic settings->Sounds->button tone.

2.Press the switch soft key to enable and disable the key tone.

3.Press save softkey to save the operation.

Summary of Contents for SIP-H680 Series























































































































Search results

Summary of Contents for SIP-H680 Series

Reviews:

Related manuals for SIP-H680 Series

Brands by name

Popular brands

LV switch SIP-H680 Series, User Manual

Search results

Summary of Contents for SIP-H680 Series

Reviews:

Related manuals for SIP-H680 Series

Brands by name

Popular brands