LvSwitch IPPBX 8000 Manual
161
Items
Description
Stutter
Default value: voice low frequency "410" HZ, voice high frequency "450" HZ, mute time
"0" ms, the pronunciation time "0" ms.
The signal sound is composed of four tuples, including low frequency of speech, high frequency of voice,
time of silence and time of pronunciation.
1. in addition to the high frequency value of "0", the low frequency value should be less than the high
frequency value. The high frequency value is "0", which means that the signal does not use high frequency.
The unit of high frequency and low frequency is Hz.
2. the four tuples can not be all the same between different signals.
3. the unit of the mute time and the pronunciation time is MS, such as the silence time and the pronunciation
time set to "0", indicating the continuous signal sound.
6.4.9 SMTP Setting
Select "Voice Config>>PBX Settings>>SMTP Setting" to open the page as shown in the following figure.
Figure 6-124 SMTP Setting
Interface items are described as follows:
Table 6-52 SMTP Setting
Items
Description
SMTP settings:
when using voicemail and sending mail, users need to configure SMTP information
SMTP Server Address
Enter server address or domain name
SMTP Server Name
SMTP name, for example [email protected]
SMTP Server Password
Password of SMTP server
6.4.10
License
Select “Voice Config>>PBX Settings>>License” to open the page as shown in the following figure.
Summary of Contents for IPPBX8000
Page 1: ...LvSwitch IPPBX8000 User Manual ...
Page 2: ...LvSwitch IPPBX 8000 Manual ii Version Product Version 1 6 0 1 Document Version A ...
Page 174: ...LvSwitch IPPBX 8000 Manual 172 Mode Engineering staff background use the customer can not use ...
Page 197: ...LvSwitch IPPBX 8000 Manual 195 ...
