LV switch IPPBX8000, User Manual

Page: 114 / 199

LvSwitch IPPBX 8000 Manual
112
Figure 6-51 Add a New Dial Rule
Interface items are described as follows:
Table 6-18 Add a New Dial Rule
Items Description
Name
Name of this dial rule
Route Group
Select route group
Outbound Route
Select configured outbound route
Dial Rule
Please refer to dial rule description
Does not match the
strategy
Select "send out does not match", and when dialing and dialing rules do not match, the
signal is sent out over reaction time. Select "send immediately when does not match", when
dialing and dialing rules do not match, send out the signal immediately.
Select "does not match then hang up immediately ", when dialing and dial rules do not
match, immediately hang up, the default value is "send out does not match"
Enable Dial Rule Each time only one rule can be enabled
Dialing rule is described as follows:
Table 6-19 Dial Rule
Items Description