LV switch IPPBX8000, User Manual

Page: 157 / 199

LvSwitch IPPBX 8000 Manual
155
6.4.7 Analog Setting
FXS - Foreign eXchange Subscriber interface (the plug on the wall) delivers POTS service from the local
phone company’s Central Office (CO) and must be connected to subscriber equipment (telephones, modems,
and fax machines). In other words an FXS interface points to the subscriber.
Basic Setting
Select "Voice Config>>PBX Settings>>Analog Setting" to open the page as shown in following figure.
Figure 6-118 Analog Interface – Basic Setting
Interface items are described as follows:
Table 6- 48 Analog Interface Configuration-Basic Settings
Items Description
Time Setting for FXS Port Number Sending
Interval of Sending Number to
PSTN
Default value is 3 seconds
Interval of Sending Hook Flash Signal
Sensing Interval of Hook switch
Flash Signal of FXS Port
Range of 300 ~ 2000ms, default value is 400ms.
Interval of Sending FXO Hook
switch Signal
Range of 300 ~ 2000ms, default value is 400ms.
Analog Setting
DTMF Length
Time of sending number to remote equipment
FXO/FXS Impedance
Multiple options
Sensing Interval of Hook switch
Flash Signal of FXS Port
Range of 300 ~ 2000ms, default value is 400ms.
Batch Edit FXO/FXS Ports
The page is shown in the following figure.