User Guide
8
© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
The XAP-1032 wireless access point is designed for indoor use only. DO NOT
place this access point outdoors. If you require an outdoor access point, please
consider the Luxul XAP-1040.
DO NOT install this access point in or near hot or humid places, such as a kitchen
or bathroom. Take care to minimize exposure to excessive heat or moisture.
DO NOT pull any connected cable with force. When disconnecting cables, do so
by disconnecting fi rst from the access point. When reconnecting, connect the AP
fi rst and then the Power/data source.
When installing the access point, be sure it is fi rmly secured.
Accessories of this access point, such as mounting screws, the POE injector and
power supply may be dangerous to small children under 3 years of age. KEEP All
ACCESSORIES OUT OF THE REACH OF CHILDREN!
The access point may become hot when in use for extended time periods. This is
normal and is not a malfunction. DO NOT install this access point where it will
be exposed to paper, cloth or other fl ammable materials. If not using the electri-
cal box included with the unit, ALWAYS use a properly shielded and UL listed
electrical box for installation.
The XAP-1032 contains no user-serviceable parts. If the access point is not
working properly, contact your dealer and ask for help. DO NOT attempt to
disassemble the access point.
4 HARDWARE FEATURES AND INSTALLATION
The XAP-1032 high powered access point is designed for optimal performance as
well as for simple and effi cient installation and setup. It implements two Luxul cir-
cular polarized directional antennas. For optimal performance, antennas should be
placed in a location that allows the antennas to be “pointed” towards the desired
coverage areas and in such a way that signal overlap between the two antennas is
minimal. Installation can be directly on a wall or discreetly in an attic, above ceiling
tiles or other non-public area. The XAP-1032 is ideal for use in L-shaped, multi-wing
or very large residential or commercial installations.
4.1 Front View
On the front of the XAP-1032 are 4 LEDs. LEDs indicate 1) Power, 2) LAN Link/
Activity, 3) WLAN Status and 4) Bridge Mode.
