User Guide
22
© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
Network Name (SSID):
Sets the name of the Wireless Network. If the SSID is not
set on a profi le, the name of the network will not be broadcast.
NOTE:
Profi le 1 is set during Quick Setup
Security Mode:
Sets the wireless security encryption mode.
Encryption:
This fi eld only shows while in WPA mode. It is used to select the
encryption method WPA will use (default is TKIP & AES).
WEP Key:
This fi eld only shows while in WEP mode. Allows the input of a 128 bit
WEP key.
WPA Passphrase:
Sets the passphrase for wireless network access.
NOTE:
If no Network Name (SSID) is specifi ed, the profi le is not active.
VLAN ID:
This fi eld is used to set the Port VLAN Identifi er (PVID) associated with
a particular SSID. This feature is used to create multiple wireless networks that
are not accessible to each other (i.e. Home, Guest, Control, etc.). Up to 8 VLAN
ID’s can be set (one for each Profi le). A smart/managed switch is required to fully
utilize this feature (see the Luxul Xen™ XMS-1024 or XMS-1008P).
To change or set a VLAN ID, simply enter a number from 1-8, then click
Save
, and
then
Reboot
for the change to take effect.
5.4 Maintenance
5.4.1 Firmware Upgrade
