luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460
User Guide
17
c. Enter the user name and password (default user name is ”admin” and default
password is “admin”), and then click “OK” to login to the Quick Setup window.
5.2 Quick Setup
Quick Setup:
For most installations, it is expected that the Quick Setup page will
be suffi cient to optimally confi gure and deploy the XAP-1032 Wi-Fi network. The
Quick Setup page consists of the following:
DHCP Client:
Enabled or Disabled. DHCP (Dynamic Host Confi guration Protocol)
is used to automatically assign an IP Addresses to a device on the network. If
DHCP is enabled on the Access Point, it will no longer use the static address set
by Luxul at time of manufacturing and will request a dynamic IP Address from the
Router (sometimes referred to as the Gateway).
When DHCP is enabled on the Access Point, the new IP address will be needed
in order to access the XenSmart™ web management interface. The Router web
interface can be used to look up the IP address assigned to the Access Point. To
Enable DHCP, click on the drop down menu and select
Enable
. Select
Apply
and
then
Reboot
for the change to take effect.
NOTE:
DHCP is set as
Disabled
by default and is the recommended
setting in order to ensure optimal communications with all Luxul
Xen devices on the network.
