![background image](http://html1.mh-extra.com/html/luxor/riviera-42/riviera-42_installation-and-owners-manual_1952570016.webp)
16
Attaching the Cleanface Mounting Frame before Installation.
As noted previously, Gas and Electrical lines should be hooked to the appliance before attaching
Cleanface Surround and fitting Non-combustible front.
The Cleanface Front Assembly is fastened to the front of the Firebox unit by the self-tapping
sheet metal screws. (Fig 1)Before beginning take care to push up the left and right tabs for
supporting the cover grille to be installed on completion.
A Power drill with ¼ Hex Nut driver should be used to attach surround as shown in Figure 2. Pre-
punched holes are provided. Once the top has been secured locate the two pre-punched holes
located on the lower inside faces. Secure the sides to the appliance with tapping screws (Figure 3)
Next, secure the supplied metal wallboard brace onto the vertical framing on either side. The
brace height should be set so that it will adequately support the Non-combustible panel and the
drywall upon completion.
Figure 1
Figure 2
Figure 3
Figure 4