![background image](http://html1.mh-extra.com/html/luxor/riviera-42/riviera-42_installation-and-owners-manual_1952570006.webp)
6
Installation
Note
: To provide the easiest installation center the appliance between the vertical framing at the rear so the venting will be
centered. This will allow venting to pass through the framing without modifications.
Minimum Framing Dimensions
Framing the Rear Vent Opening at 14.25” square is necessary for required Wall Thimble. (Part # WTR58) Non-
Combustible panel (supplied by Canadian Fire Hearth) must be installed on the top of the opening.
Non-combustible panel must be
fastened to the top of any
combustible framing.
20.5” from floor or platform to the
frame opening Is lowest acceptable
measurement.
24” to the venting termination
center from either the floor or
exterior ground level is the
Minimum Allowable
Clearance
Clearance to side walls is 0 inches
Rear Venting Exit Minimum
. Center vertical
framing with appliance
• Gas Inlet Location
6” from front by 3.5”
above floor.
•Electrical connection is
centered 10” from front at
3.5” from floor on each
side of the appliance
Metal support for Non-
combustible facing
42.5