16
Fan Controls
Factory default settings will automatically control the air flow. When the unit is
powered on, fan speed will default to its maximum value. Realtime fan speed is read
from the unit and displayed in the fan speed “Reading” box.
To change the fan speed, the user may type a desired fan speed value (0.0 to 7.0 CFM)
into the fan speed “Set Point” field, then click the “Set”
Button.
Note: The user-defined fan speed Set Point will not be saved when the unit is powered
off. It is recommended to run the unit only at factory default fan speed.
Power Meter (
Only in models ordered with a Power Meter
)
The Power Meter Section, shown in Figure 11, will only be enabled if the BeST-SLED®
ISB2 has a Power Meter
, otherwise “Start”, “Stop” and “
Clear
” buttons will be
disabled.
Figure 11: Power Meter Section
Summary of Contents for BeST-SLED ISB2
Page 37: ...37 12 Ordering Code 12 1 Standard BeST SLED models...
Page 38: ...38...
