6
QUICK LIFT L520E
EN
Vehicles should only be lifted at the lifting points recommended by the car manufacturers. Make sure that the QUICK
LIFT does not come into contact with areas close to the airbag activation sensors during and after the climb.
Do not place the rubber spacers on an area with plastic lining.
Take care of electrical cables and hydraulic hoses, do not crush them or step on them.
In the event of a violent impact on the load-bearing and/or structural elements of the QUICK LIFT, it is imperative to take
the product out of service and contact your dealer or the manufacturer in order to assess the damage before putting it
back into service.
In case of doubt about the strength of the vehicle structure (presence of rust) - Do not lift the vehicle.
Intended use also includes familiarising yourself with these operating instructions and complying with all the instructions
contained therein, in particular the safety instructions.
Enforce safety and risk prevention standards in the country’s workplaces.
In addition, this also includes the obligation to carry out all inspection and maintenance work at regular intervals.
In the event of improper use of the lift, the operational safety of the QUICK LIFT is not guaranteed.
Damage to persons and property, also on vehicles, caused by improper use of the device is in no way the responsibility
of the manufacturer, but of the operator handling the QUICK LIFT.
QUICK LIFT must not be used in a potentially explosive atmosphere and it is not recommended to work next to a heat
source. The QUICK LIFT was not designed for use in a spray booth.
It is forbidden to use spare parts other than original parts certified by the manufacturer.
Make sure that your QUICK LIFT is in one of the two locked positions before you start working around or underneath.
Also make sure that the wired control unit cannot be manipulated by unauthorized persons.
At the end of a work session, return the vehicle to the ground to avoid operating the QUICK LIFT with a full load for a
long period of time.
PACKAGING AND UNLOADING
In a pocket in the hydraulic power pack, you will find the QUICK LIFT operating and testing instructions. On delivery,
check for external transport damage. In case of visible damage, leave the goods and packaging as they are. Do not use
the goods and contact your dealer directly. Failing this, a reservation must be made to the carrier.
Unloading can be done either with two people wearing gloves and safety shoes or by means of a forklift truck.
INDIVIDUAL PROTECTION
The operator must be equipped in accordance with the occupational risk prevention standards applicable in his country
and must adopt all necessary measures to maintain safety at his workstation. During manoeuvres, the operator must
ensure his own safety and that of the people and objects around him. The operator must take into consideration all the
recommendations quoted in this manual.
Hydraulic fluid is dangerous if splashed in the eyes or if it comes into contact with
blood. In this case, contact your doctor immediately. Never reach over your hand to
check for a hydraulic leak: risk of cut and contamination in the bloodstream that could
lead to death.
