p.16/41
LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK – BELGIUM
T: +32 3 293 35 50 – F: +32 3 293 35 44
www.lux-lumen.com
In the layout above, we do a direct connection to the ArtNet
node to a PC, and we daisy chain the second card to the first
card.
11.2
The IP adress of the node.
The artnet node has a preprogrammed IP address, which you
can find on the label which you can find on the right upper
corner of the PCB.
In this case, the IP address is 2.121.16.70. This IP address is
not end-user-changeable. If for a particular reason, a dedicated
IP address is needed, please contact
11.3
Where can I find the subnet in a IP address?
You can find the subnet in an IP address as the first number in a
series of 4.
For example: 5.11.654.231 is an IP address in subnet number 5.
You have to set the IP address on your PC to the same subnet as
the IP address of the ArtNet node. Since the ArtNet standard
always uses IP addresses in the subnet ‘2’, the IP address on the
PC has to be 2.xxx.xxx.xxx. We even recommend to use a fixed
address 2.0.xxx.xxx, to avoid conflicts with other ArtNet devices
in the network.
