p.31/41
LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK – BELGIUM
T: +32 3 293 35 50 – F: +32 3 293 35 44
www.lux-lumen.com
14.2
Patch blocks
With the patch-blocks you can define which portion of the input
buffer (Artnet) goes to which output. The start parameter is the
channelnumber from buffer where the output starts.
This is a number between 1 and 5119.
The range is the number of channel for this output.
Depending on the protocol, this is a number between 1 and 512
or 1 and5120.
So it is possible to route all 10 DMX universes to one output, but
it is not recommended to do so. The frame rate is inversly with
the number of channels outputed.
There are 2 possible ways to input the numbers. By dragging the
blocks and text number input. Check the mouse pointer before
clocking to see what function is selected.
14.3
Artnet select
Enter the univers number the node needs to capture this buffer.
It is possible to specify 10 completely different universes in any
order.
Duplicate universes are not allowed.
Enter a number between 0 and 32767
