LION Bus Coupler
▪
Safety
12
3.5
Responsibility of the Operator
The operator is obligate by the law of occupational safety, if the product is used
in a commercial field.
▪ The operator is responsible to train the employees and to inform himself about
the industrial safety regulation.
▪ The operator is responsible that safety, environment protection regulations
and rules for accident prevention are observed.
▪ The operator has to run a risk assessment at the working environment/place
of installation to expose hazards and to alert those.
▪ The manual has to be stored near the product.
▪ The manual has to be obeyed.
▪ The product can just be run in a faultless technical condition.
3.6
Protective Clothing and Equipment
3.7
Electrostatic Discharge (ESD)
Electrostatic discharge can destroy electronical components by voltage and
energy, which are not noticeable by humans. Damages can occur if an
electronical component is touched by an electrostatic discharged person.
Modules will not immediately recognized as malfunctioned, the maloperation will
occur after a longer operating time.
▪ Switch off the voltage before working with or on the module and work
according the ESD guidelines.
▪ Electronic components should not be contact electronic insulated material like
plastic foil, plastic parts, insulated table pads or clothing.
▪ Place the modules only on conductive surfaces.
3.8
Reconstruction and Modifications of the Product
▪
Destroyed parts and malfunction of the product.
Inappropriate clothes can cause electrification and can damage the product.
If working with or on the components, wear special ESD clothing.
▪
Also follow the instructions and regulations of the employer.
Personal injuries and property damages caused by reconstructions and
modifications of the product.
▪ Do not reconstruct or modify the product if the manufacturer does not allow
it explicit in writing.
