Lutron Electronics QSPS-P2-10-60, Installation Instructions Manual, Page: 2 / 16

QSPS-P2-10-60
230 V~ 50/60 Hz 4 A
Installation Instructions
(Please leave for occupant)
Please read before installing.
Tools Required:
Wire Cutter/Stripper Power Drill
Small Flat-Head Screwdriver #2 Phillips
®
Screwdriver
NOTE: Mounting hardware is not included due to the wide variety of wall materials.
Customer should determine the appropriate mounting hardware for their specific needs.
Box Contents:
QSPS-P2-10-60
Important Notes
1. All wiring must be in accordance with national and local electrical codes.
2. QSPS-P2-10-60 must be installed by a qualified electrician.
3. Ambient operating temperature: 0 to 40 °C (32 to 104 °F), 0 to 90% humidity,
non-condensing.
4. This product is intended for indoor use only .
5. On power-up under unfavorable mains conditions, this device may cause interfering
voltage fluctuations (flicker). To prevent such interference, the system impedance
Zmax shall be 0.21 Ohms or less at the interface point (power service box). If
necessary, the user can ask the public power supply company for the system
impedance at the interface point.
1
1.1
Page 1
Sivoia
®
QS QSPS-P2-10-60 (CE) Installation instructions