Lutron Electronics QSPS-P2-10-60, Installation Instructions Manual, Page: 11 / 16

5
5.2
Diagnostics
(continued)
Communications Link LEDs
The QSPS-P2-10-60 has four diagnostic LEDs for the communications link.
Diagnostic LEDs
Reserved for future use
Reserved for future use
Link Traffic
This LED will blink green to
indicate that devices are
communicating.
Status LED
This LED indicates that the
panel is operating properly.
If this LED is off, check
your wiring.
5.3 Verify Communications
To verify the communications of your system, tap, hold (5 seconds), tap, hold
(5 seconds) the All Shades Open button. The QSPS-P2-10-60 is now trying to
communicate with all other devices. All EDUs communicating on the link will wiggle
and flash their green LED quickly. If you discover any EDUs that are not wiggling,
verify that the EDU is powered and wired properly. Link Diagnostics Mode will
automatically time out after 10 minutes.
To exit Link Diagnostics Mode, press and hold the All Shades Open button for
5 seconds.
Page 10
Sivoia
®
QS QSPS-P2-10-60 (CE) Installation instructions