®
Wallbox Power Module Installation and Operation Guide 7
Entering and Exiting Programming Mode
Entering programming mode:
Press and hold the timeclock (back) and OK
buttons simultaneously for 3 seconds. The
LED in the scene button and corresponding
LEDs below the scene button will scroll
from top to bottom, confirming that you are
in programming mode, and the info screen
will display the main menu.
Exiting programming mode:
Press and hold the timeclock (back) and OK
buttons simultaneously for 3 seconds. The
info screen will go to Scene 1.
Navigating Menus in Programming Mode
Master Buttons
The Master buttons allow you to move through the menu
choices. The current choice is highlighted on the info screen.
OK Button
The “OK” button chooses the current highlighted menu choice.
This will either take you to the next menu or accept a setting you
have selected. When the screen displays a Yes/No question, the
“OK” button is “Yes”.
Timeclock Button
The Timeclock button functions as a “back” button during
programming mode. Pressing the Timeclock button takes
you back one step in the current menu. Pressing it repeatedly
will eventually return you to the main menu, but will not exit
programming mode. When the screen displays a Yes/No
question, the Timeclock button is “No”.
Programming Mode
OK
1
2
3
4
5
6
9
10
11
12
13
14
7
8
15
16
9-16
1-8
Master buttons
“OK” button
Timeclock (back) button
Main menu
Scene setup
Timeclock
Scene 1
Fade time
3 seconds
