Lutron Electronics DMW-LZC1, Installation And Maintenance Manual, Page: 34 / 40

This page applies to:
LZC1
Small
Panel Std.
Panel
Appendix: Emergency Mode
(continued)
Wiring Method Two (continued)
Switch S3: Each lighting zone controller on Link 3 will enter emergency mode. Lighting
zone controllers on other Digital microWATT
TM
router panels or GRAFIK
TM`
7000P processor
panels, or on Links 1 or 2 of the same panel, will not be affected.
Switch S4: Only lighting zone controller A will enter emergency mode. Neither lighting zone controller B nor any
other lighting zone controller will enter emergency mode from switch S4.
MUX MUX LINK CO
M
EMERG SHIELD
MUX MUX LINK CO
M
EMERG SHIELD
+24V PS Signal PS CO
M
CIR CO
M
WC CO
M
WC SIGNAL +24V +15V OCC SIG OCC CO
M
+24V PS Signal PS CO
M
CIR CO
M
WC CO
M
WC SIGNAL +24V +15V OCC SIG OCC CO
M
GND GND
Switch S4
(normally closed)
Emergency
Shield
MUX
Link common
MUX
To panel
or previous lighting zone controller
To next lighting zone controller
Lighting Zone Controller A Lighting Zone Controller B
First Lighting Zone Controller on Link 3
Router Panel or
GRAFIK 7000P Processor Panel
MUX MUX LINK CO
M
EMERG SHIELD
LZC LINK 1 LZC LINK 2 LZC LINK 3
GND
+24V PS Signal PS CO
M
CIR CO
M
WC CO
M
WC SIGNAL +24V +15V OCC SIG OCC CO
M
COM EMERG MUX MUX Shield COM EMERG MUX MUX Shield COM EMERG MUX MUX Shield
Emergency
MUX
Shield
Link common
To lighting zone controllers
on LZC links 1 and 2
To next lighting zone controller
on LZC link 3
Switch S3 (normally
closed)
MUX
R
34 Installation Guide for Lighting Zone Controllers