CDD3000-HF Operation Manual
1-1
DE
EN
FR
IT
FR
1
Safety
1.1
Measures for
your safety
The CDD3000-HF servo drives are quick and safe to handle. For your
own safety and for the safe functioning of your device, please be sure to
observe the following points:
Read the Operation Manual first!
•
Follow the safety instructions!
Electric drives are dangerous:
•
Electrical voltages > 230 V/460 V:
Dangerously high voltages may still be present
10 minutes after the power is cut. You should therefore
always check that no power is being applied!
•
Rotating parts
•
Hot surfaces
Your qualification:
•
In order to prevent personal injury and damage to
property, only personnel with electrical engineering
qualifications may work on the device.
•
The qualified personnel must familiarize themselves with
the Operation Manual (refer to IEC364, DIN VDE0100).
•
Knowledge of national accident prevention regulations
(e.g. VBG 4 in Germany)
During installation observe the following instructions:
•
Always comply with the connection conditions and
technical specifications.
•
Comply with the standards for electrical installations,
such as regarding wire cross-section, grounding lead and
ground connections.
•
Do not touch electronic components and contacts
(electrostatic discharge may destroy components).
