Lupus Electronics XT 1 Plus, User Manual

Page: 198 / 332

198
Heat detector
Product description:
The heat detector is equipped with two sensors. One measures the temperature and the
other measures how fast the temperature changes. If the temperature rises faster than
8.3°C per minute or rises above 57.3°C (135.14F), an alarm will be triggered (95dB). The
heat detector is perfect for the kitchen, since, due to steam, normal smoke detectors are
prone to trigger false alarms. The heat detector should be installed in the middle of the
ceiling and at least 50cm (1.6 feet) from walls, corners, lights, beams, decorations, etc.
Sensor data:
Dimensions (without mount)
Ø
10.5 x 4.2 cm (
Ø
4.13 x 1.65 inches)
Weight: 240 grams (0.52 lbs.)
Place of installation: Only indoors
Operating temperatures: -10 °C to 50 °C (14F to 122F)
Humidity: Maximum 95 % (non-condensing)
Radio frequency: 868.6375 MHz
1.
Red LED

On, if batteries are low or if there is a defect

On for 2 seconds: alarm is transmitted

Flashes every 30 seconds: low battery
2.
Learn button

Activates the learn and range mode

Deactivates alarm
3.
Battery compartment
4.
Installation notch
5.
Mount
Battery:
The heat detector requires three 1.5 V AA batteries. The average battery life is three
years. The heat detector will inform the alarm panel if the batteries are running low about
two months before they are empty.
Connecting the heat detector and putting it into operation:
1.
Insert the supplied batteries.
2.
After their insertion, the heat detector emits two short beeps and the LED lights up
once in red.
3.
Close the housing.
4.
Open the web interface of the alarm panel, open the menu “Sensors”  “Add”,