Lupus Electronics XT 1 Plus, User Manual

Page: 164 / 332

164
Please note (signal strength) :
If the signal strength at the place of installation is below 4, we advise to use a ZigBee
repeater, since it is normal that the signal strength may fluctuate for 2-3 points, thus,
a signal loss is possible.
Please note:

In the menu “Sensor”  “List”, shows the status (on / off) of the relays outputs.

The double channel relay does not feature a power meter.

You can control the relay via the menu “Smarthome”  “Wireless Plugs”, or the
menu “Home”  “Wireless Plugs-app”.

In the menu “Smarthome”  “Automation”, you can set up automation rules for the
relay. You can find examples in the manual of the alarm panel (chapter
Smarthome).

In the menu “Smarthome”  “Wireless plugs”  “Group settings”, you can group
relays in order to control them simultaneously.

The double channel relay does not feature a backup battery. In case of a blackout
or power failure, it does not function.

After a blackout or power failure, the relay returns to its previous state (on / off)
after approx. one minute.

The double channel relay (like all ZigBee devices) is not compatible with the
wireless repeater and is not saved in the backup file.

The double channel relay features a ZigBee repeater and automatically
enhances the signal strength of other ZigBee devices.

Adding a double channel relay allows you to connect 40 additional ZigBee
devices (up to the limit of devices the alarm panel supports).