Lupilu LBNZ 500 A1, Operating Instructions Manual

Page: 35 / 152

LBNZ 500 A1
■ 32 │
GB
│
IE
♦
Place the food onto the steamer grill . Ensure that you do not fill the
steamer insert to above the upper edge .
NOTE
► Do not overfill the steamer insert by packing the food too tightly or
covering all the holes in the steamer grill . The steam must be able to flow
between the pieces and through the holes in the steamer grill .
♦
Place the lid onto the container so that the symbol on the lid
points to the marking at the top of the container handle . Then turn the
lid clockwise so that the symbol points to the marking at the top of
the container handle and the lid clicks into place .
♦
Place the container onto the appliance base so that the marking
at the bottom of the container points to the
symbol on the appliance
base . Then turn the container clockwise so that the marking on
the container points to the symbol on the appliance base and the
container clicks into place .
handling and use
Starting/stopping steaming
♦
Turn the function selector to the position . The function indicator
lights up red . The appliance now heats up the water in the container and
brings it to the boil . The steam created rises into the steamer insert and
cooks the food on the steamer grill .
♦
For cooking times, please refer to the guide values that we have provided
in the section
recommended cooking times
.
♦
After the cooking time is complete, turn the function selector to the
0
position to switch off the appliance .
♦
Without a manual switch-off, the appliance will stop steam cooking
automatically after around 30 minutes and there will be a beep .
WARNING – RISk Of INjURy!
► The steam escaping from the steam outlets on the lid and the surface of
the container are hot . Avoid contact with this steam and the container
during steaming!
► Never open the lid before the end of the cooking process to prevent
contact with escaping steam and hot water on the inside of the container .
► Do not open the lid until the water has stopped boiling and no more
steam is coming from the steam outlets on the lid .
♦
Turn the function selector to the
0
position .