Luneau Technology Briot emotion2, Instruction Manual

Page: 32 / 162

Using your Edger...Usual procedure
3-31 LTO
3.2.2 S
CANFORM
Create a job
Enter the new a job number.
Select the frame type.
Insert the pattern or the demonstration lens that has
been blocked on the frame holder
NOTE : The lower part of the pattern should push the
centering nose and the lower parts should be positio-
ned between the Scanform clips Scanform
Select the side(s) to be entered.
Select the entry type:

Automatic insertion

Semi-automatic insertion
Put the frame in the Scanform, and close
the jaws
Launch the entry for the frame data
Launch the entry for the pattern or 
demonstration lens
the keypad is displayed, enter the value
of the frame bridge
Entering the frame data
Entering a pattern