9-26
EQUIPMENT DETAILS
TO REPLACE THE FILTER, FOLLOW
THESE STEPS:
1.
Disengage the bottom and middle covers as
described in “Installation procedure”, steps
1-4.
2.
Observe how the filter is installed before
removing. Lift filter straight up to remove.
3.
Replace with a new filter. Note that the
carbon filter must be in place for the cooker
hood to operate.
4.
Reinstall the middle cover and snap into
place.
5.
Reinstall the bottom cover and secure with
the two screws.
CHANGING THE HALOGEN LAMP
Halogen lamps get very hot during use and
remain hot for some time after being
switched off. Please allow the halogen lamps
to cool before removing.
TO CHANGE THE LAMP, FOLLOW THESE
STEPS:
1.
The lamps are mounted on the top cover. In
order to replace the lamps you need to
disengage the bottom and middle covers.
For instructions, see “Installation
procedure”, steps 1-4.
2.
Gently pull to remove the lamps from their
sockets.
3.
Replace with halogen lamps of the same
specification (10W, 12V GU4) and put back
the cover.
WASTE MANAGEMENT
Appliances bearing this symbol must be
deposited at the designated local reception
point for the disposal of electrical and
electronic equipment. It is not permitted that
this product be disposed of by way of the
normal household refuse collection system.
IMPORTANT: Users are advised not to
leave a bare flame burning below the
CK2000 for longer than necessary (5-10
minutes maximum).
Summary of Contents for Cassini EB 2018
