Lunar Cassini EB 2018, Handbook

Page: 71 / 124

9-11
EQUIPMENT DETAILS
REFRIGERATOR
Your new Motorhome is fitted with a Dometic
refrigerator. Details of how to operate your
fridge are shown opposite:
The refrigerator is equipped to operate on
three power modes:
• Mains voltage (230V AC)
• Direct current voltage (12V DC)
• Gas (liquid gas, propane/butane)
Select the desired power mode by the
energy selector switch (battery igniter type
models) or the energy selector button (MES,
AES). Appliances with automatic energy
selection (AES) are additionally provided
with “automatic mode” function. Then the
AES system automatically selects the best
energy source for each particular situation.
The cooling unit is silent in operation.
When the appliance is first put into
operation, there may be a mild odour which
will disappear after a few hours.
The refrigerator will take several hours to
reach its operating temperature in the
cooling compartment. The freezer
compartment should be cold about one hour
after switching on the refrigerator.
Cleaning
Before starting up the refrigerator, it is
recommended that you clean it inside and
repeat this at regular intervals.
1 Operating controls.
2 Door locking button.
3 Freezer compartment (removable)
4 Insertable grid shelf (available as option, to be
used when freezer compartment is removed).
5 Post-evaporator for cooling compartment.
6 Condensation water drain channel.
7 Vegetable bin.
8 Upper door shelf with flap, egg shelf available
as option may be inserted.
9 Lower door shelf with bottle holders
Use a soft cloth and lukewarm water with a
mild detergent. Then wipe out the appliance
with clean water and dry thoroughly.
To avoid material alterations, do not use
soap or hard, abrasive or soda-based
cleaning agents. Do not allow the door seal
to come into contact with oil or grease.
Maintenance
In compliance with applicable regulations,
please note that the gas unit and the
connected ventilation ducts must be checked
by an authorised technical personnel after first
use and after every other year for compliance
with the European Standard EN 1949. A test
certificate has to be issued.
It is the user’s
responsibility to arrange this test.