9-31
EQUIPMENT DETAILS
On the sliding door side of the vehicle locate the
handle positioned in the bed end (Fig 2) and also
the turn buckle positioned in the side step to the
rear of the bed. (Fig 3).
Rotate the turn buckle
catch to unlock the
short bed (Fig 4)
allowing it to extend as
displayed (Fig 5).
Fig 4
For the bed extension four infill sections are
supplied, three of which are located in the slide
out storage box and one hinged piece located
behind the storage box under the near side bed.
Remove these infill sections from their locations
as displayed in (Fig 6).
Fig 2
Fig 3
Fig 5
Fig 6
Fig 6
Locate the slide out extension on the long bed.
The extension can be pulled out half way to
support a larger single on one side, or fully to be
a supporting base for the double bed. (Fig 7).
Fig 7.1
Fig 7.2
Summary of Contents for Landstar 2017
