Lunar Caravans Landstar 2017, Handbook

Page: 87 / 108

9-29
EQUIPMENT DETAILS
Day Time Table
The following step by step guide illustrates how
to set up the small daytime table located at the
front of the vehicle. (
Note: Daytime table
supplied is vehicle layout specific).
The daytime table supporting legs location, if
applicable, is vehicle layout specific, see (Fig 1)
for example purposes. The supporting leg can
be unlocked (1) and swung into required position
(2). How to unlock the supporting leg is
illustrated in (Fig 2). How to unlock the
supporting leg is illustrated in (Fig 2) twist the
two knobs locking the supporting leg to the
unlocked position, swing supporting leg to the
required location then tighten to lock supporting
leg into new location.
The main table supporting leg can be used with
the small daytime table top. (
Note: Daytime
table top supplied is vehicle layout specific).
The small daytime top is located in the
wardrobe during vehicle transit (Fig 1).
Following previous steps from (Fig 2, Fig 3)
remove the table top from the wardrobe and
use the locating point (Fig 7) to position
correctly onto the supporting leg (Fig 8). The
small table set up will be shown (Fig 9) also
with the option of rotating the table to a desired
location (Fig. 10).
Once the supporting leg is locked into position
the small daytime table top is required. This is
located in the wardrobe during vehicle transit.
Remove the table top from the wardrobe and
use the locating point (Fig 4) to locate correctly
onto the supporting leg. Once positioned
correctly twist the knob located on the end of
the supporting leg to lock small table top into
required position (Fig 4).
Fig 7
Fig 8
Fig 9
Fig 10
Fig 1 Fig 2
Fig 3
Fig 4
Fig 5
Fig 6