9-21
EQUIPMENT DETAILS
Microwave (Daewoo)
Operation Procedure
•
Plug power supply cord into 230V AC
50Hz power outlet.
•
Press eco button until beep sounds and
display is turned on.
•
After placing the food in a suitable
container, open the oven door and put it
on the glass tray. The glass tray and
roller guide must always be in place
during cooking.
•
Close the door. Make sure that it is firmly
closed.
•
The oven door can be opened at any
time during operation by pushing the
door open button. The oven will
automatically shut off. To restart the
oven, close the door and then push the
START button.
•
The oven automatically cooks on full
power unless set to a lower power level.
•
The display will show ": 0" when the oven
is plugged in, press and hold Eco button
until display is turned on and beep
sounds.
•
Display will be returned to the ": 0" when
the cooking time ends.
•
When the STOP/CLEAR button is
pushed during the oven operation, the
oven stops cooking and all information
retained. To erase all information, push
the STOP/CLEAR button once more.
•
If the START button is pushed and the
oven does not operate, check the area
between the door and door seal for
obstructions and make sure the door is
closed securely. The oven will not start
cooking until the door is completely
closed or the program has been reset.
•
Display turns off after 10 minutes.
Make sure the oven is properly installed
and plugged into the electrical outlet.
1
DISPLAY
- Shows cooking time and power levels.
2
AUTO COOK
- Use to cook or reheat common foods.
3
WEIGHT DEFROST
- Defrost food based on weight.
4
TIME DEFROST
- Defrost food by time.
5
POWER
- Use to set power level.
6
ONE TOUCH COOK
- Cook or reheat specific
quantities of food.
7
TIME SET BUTTON
- Set the cooking time and
weight.
8
STOP/CLEAR
- Stop the oven operation or delete the
cooking data.
9
START/+30 SEC
- Start the oven and also use set a
reheat time.
10
ECO
- Used to turn the AC power on the oven.
Summary of Contents for Landstar 2017
