Lunar Caravans Landstar 2017, Handbook

Page: 47 / 108

8-29
The following table shows details of the fuse(s) located at the EM40 Interface Unit
Fuse Rating Fuse Colour Description
1 Spare location
2 5 Amps Tan Marker Lights
3 20 Amps Yellow Tow Bar +
4 20 Amps Yellow Vehicle Battery
5 Spare location
6 20 Amps Yellow
7 20 Amps Yellow Tow Bar D+
8 20 Amps Yellow Fridge D+
Fault Possible Cause Proposed Fix
No 230 volt Connecting lead between Check and connect lead as per 2.3C
output from PSU the site and Leisure
Vehicle not connected
RCD switched off Reset RCD as per 2.3D
RCD not operating Check supply polarity; if the RCD continues to fail contact your Dealer as there is probably an equipment or wiring fault
correctly
MCB switched off Reset MCB by switching OFF (down position) then back ON (up position), if the MCB continues to fail contact your Dealer as there is
propably an equipment or wiring fault
No or deficient supply Contact site Warden for assistance
from site
Reverse Polarity Mains Supply reversed? The reverse polarity light is designed to illuminate when the Live and Neutral supply has been reversed/crossed over. If the light illuminates
light is there is a problem with the site supply or the cable connecting the supply to your vehicle. The light is designed to work on UK electrical
illuminated on PSU supplies (where the neutral conductor is connected to earth at the sub station). If you are using your vehicle outside the UK this light may
illuminate when no fault exists. In these cases consult the site warden for advice.
3.14 Common Fault Table
SERVICES