Luminite Alertex NXECSB, Manual

Page: 8 / 16

8 www.luminite.co.uk
Change the Sounder Volume and Pattern
There are 32 different sounds to choose from and you can adjust these
using dip switches 1 to 5. All 5 switches DOWN will give you the regular
banshee sound. All 5 in the UP position gives a bell tone. Here is a full list
of all 32 variants.
Unscrew the sounder beacon. You will see 8 dip switches. Switches 1 to
5 are concerned with the alert sound and switches 7 and 8 are to adjust
the volume
• When both switches are in the UP position this is the maximum sound
level
• Switch 7 UP and switch 8 DOWN will reduce the sound by 10 decibels
• Switch 7 DOWN and switch 8 UP will reduce the sound by 20 decibels
On Sounder variants, the sound volume and sound pattern can be adjusted
using the dip-switches on the back of the sounder. On Annunciator
variants, only the sound volume can be adjusted. Sound files for the
Annunciator must be provided at the time of ordering and cannot be
changed once the unit has been sent out.
Adjusting the Volume
Changing the Sound