background image

ACCESSORY

READ AND SAVE THESE INSTRUCTIONS

TO REDUCE THE RISK OF FIRE, ELECTRICAL 

SHOCK, OR INJURY TO PERSONS, OBSERVE 

THE FOLLOWING:
a.  Use this unit only in a manner intended by 

the manufacturer.  If you have questions, 

contact the manufacturer.

b.  Before servicing or cleaning unit, switch 

power off at service panel and lock 

service panel disconnecting means to 

prevent power from being switched on 

accidentally. When the service discon-

necting means cannot be locked, securely 

fasten a warning device, such as a tag, to 

the service panel.

 

WARNING

!

Part No. F40BP74160001 

Form No. BP7416-1

Revision: 03312021 

Printed in China  03/2021

Ceiling Fan/Light Receiver & Reverse Module 

Owner’s Manual

Safety Instructions

1. Read your Owner’s Manual carefully 

before installing the Receiver. Retain Owner’s 

Manual for future reference.

2.  Make certain no bare wires are exposed outside 

the wire connectors.

3.  All wiring must be in accordance with the 

National Electrical Code “ANSI/NFPA 

70-2017” and Local Electrical Codes. Use the 

National Electrical Code if Local Codes do 

not exist. If you feel you do not have enough 

electrical wiring knowledge or experience, have 

your Fan/Light Control installed by a licensed 

electrician. Electrical installation should be 

made or approved by a licensed electrician.

4.  Use of this Control with some Ceiling Fans 

could result in fire, shock and serious personal 

injury. Use this Fan/Light Control only with 

capacitor speed controlled Ceiling Fans. 

RCK55

6-Speed Receiver

RCK55 Receiver Supplied with Reverse Module for K55 Motor Fans

FOR USE WITH SR600 REMOTE CONTROL, SR650 REMOTE CONTROL AND/OR SW605 WALL CONTROL

Summary of Contents for RCK55













Reviews: