Lumikit Sistemas para Iluminação
Lumikit Sistemas para Iluminação
Lumikit Sistemas para Iluminação
Lumikit Sistemas para Iluminação | www.lumikit.com.br
18
18
18
18
7.
7.
7.
7.
Firmware update
Firmware update
Firmware update
Firmware update
Using a Pen Drive connected to the USB port of the interface, the firmware update can be made.
The latest firmware version of the Lumikit PRO X4 interface can be found in the site:
http://www.lumikit.com.br/interface-dmx-lumikit-pro-x4
or directly through this link
http://www.lumikit.com.br/firmware/interface-lumikit-pro-x4/,
where all versions are available.
To do the update:
•
copy the file named lkprox4.cry to the main folder (\) of the Pen Drive, keep in mind that the Pen Drive
must be on the FAT or FAT32 format;
•
turn off the interface, connect the Pen Drive to the interface;
•
press and hold the “PLAYBACK/SAVE CONFIG” button, turn on the interface;
•
if the lkprox4.cry file is found on the Pen Drive, the “USB STATUS” LED will be on for approximately 10 to
20 seconds, which is the needed time for updating the firmware;
•
after the update, confirm the firmware version on Lumikit’s software, the version is shown after the
interface identification, in the example, LUMIKIT PRO X4 version 10 (V10):
Do not attempt to change the lkprox4.cry file, do not use files from other suppliers under the risk of
Do not attempt to change the lkprox4.cry file, do not use files from other suppliers under the risk of
Do not attempt to change the lkprox4.cry file, do not use files from other suppliers under the risk of
Do not attempt to change the lkprox4.cry file, do not use files from other suppliers under the risk of
“bricking” the interface, this issue will not be covered by the warranty.
“bricking” the interface, this issue will not be covered by the warranty.
“bricking” the interface, this issue will not be covered by the warranty.
“bricking” the interface, this issue will not be covered by the warranty.
8.
8.
8.
8.
Remote control for Android and iOS
Remote control for Android and iOS
Remote control for Android and iOS
Remote control for Android and iOS
Through the Lumikit PRO X4 RC app, available on the App Store (for iOS 8 or superior) and Google Play (for
Android 4.0 or superior) it is possible to control remotely the Lumikit PRO X4 interface, as long as the interface
and the cellphone or tablet are connected to the same Wi-Fi network as the interface. Tap over the “PRO X4”
logo in the upper corner the available interfaces on the network will be shown: