Lumikit PRO X4, User Manual, Page: 14 / 26

Lumikit Sistemas para Iluminação
Lumikit Sistemas para Iluminação Lumikit Sistemas para Iluminação
Lumikit Sistemas para Iluminação | www.lumikit.com.br 14
14 14
14
•
The DMX outputs can be connected directly to the lighting devices which will be controlled, it can also be
used as a splitter or buffer for the DMX signal in case more than 32 lighting devices are connected in a
DMX output;
•
The power comes through a socket, the power supply works with 110 or 220V, it is not necessary to
select the tension, the power supply is automatic;
•
The Ethernet connection:
o
can be connected directly to the network card from the computer through a cable;
o
can be connected to a Ethernet switch in case of more interfaces or other devices in the same
network;
o
can be connected to an access point or router (wireless) allowing wireless communication;
To connect more than one interface on the same network, the IPs must be changed, below there is an example
of a connection of 2 or more interfaces on the same network:
Note that the second interface has a different IP address than the first interface, always use different IP
addresses.The computer is in the same network class as the interfaces (class C – 192.168.XXX.XXX).
6. 6. 6. 6. Program recording in the P Program recording in the P Program recording in the P Program recording in the Pen Drive en Drive en Drive en Drive
In the Lumikit PRO X4 interface it is possible to connect a Pen Drive in the USB port, this Pen Drive can be used
to record up to 20 programs, each program can have at most 30 minutes of Art-Net signal at 25 FPS.