13
CONTROLS REFERENCE GUIDE (continue)
PRESET FILTER CYCLES
The first filter cycle begins 6 minutes after the spa is powered on. The second filter cycle begins 12 hours later. Filter dura-
tion is programmable for 1 to 8 hours out of 12. The default filter time is 2 hours.
To program, press Warm or Cool button, then Jets. Press Warm or Cool button to adjust.
Press Jets to exit programming. The pump runs on low speed during filtration.
FREEZE PROTECTION
If the sensors detect a drop in heater temperature below 7ºC (45ºF), the pump will automatically activate to provide freeze
protection. The equipment stays on for 4 minutes more after the sensors detect that the spa temperature has risen to 7ºC
(45ºF) or higher. This is why it is highly recommended to start the spa only when temperatures exceed 0ºC (32ºF).
REMINDER
Change filtration cycle
repeat until desired cycle
Change lighting effect
press until desired effect is achieved
*Change mode
press until desired mode is reached
*available only on un-programmed model
Summary of Contents for spa-O
Page 23: ...23...
