background image

Light source outputs are refined by bandpass filters.  The specifications of these bandpass filters are 
recorded on the certificate of conformance as CWL/FWHM where CWL =center wavelength and 
FWHM = full width at half-maximum transmission, both measure in nanometers (nm).  Bandpass 
filters are not user-exchangeable and changes require return of the light engine to Lumencor’s 
factory for service (see Section 7).  Since changing bandpass filters will result in source output 
power changes, a new certificate of conformance will be provided as part of this service.

5.  Operational Specifications 

The RETRA (L) Light Engine

®

 must be operated and stored within the environmental conditions 

specified in the table below.  Performance specifications for individual light engines are listed on the 
certificate of conformance included with the shipping documents e-mailed to the customer (see 
example shown in Figure 1).  It is important to retain the certificate of conformance for reference.  In 
the event that the light engine is sold, the certificate of conformance should be transferred to the 
new owner.  Certificates of conformance are also recorded in Lumencor’s database and copies can 
be requested by e-mail to [email protected].  The request message must include the 4- or 
5-digit serial number of the light engine.

Specification

Detail

Temperature

Operating

32 to 95° F (0 to 35° C)

Non-operating

-4 to 158° F (-20 to 70° C)

Humidity

Operating and non-operating

0 to 80% relative humidity, non-condensing

¹

Dew Point

Operating

32 to 59° F (0 to 15° C)

Altitude

Operating

0 to 10,000 feet (3,048 meters)

Non-operating

0 to 45,000 feet (13,176 meters)

Dimensions

Size (W x L x H)

145 mm x 190 mm x 203 mm (5.7 in x 7.5 in x 8.0 in)

Weight

4.3 kg /9.4 lbs

Lifetime

Time for light engine output to decrease to 70% of the values recorded on the 
original certificate of conformance

𝟤

Power supply

24VDC / 9.2A

Warm-up Period

1 s

Protection

Thermal overload (Section 3.2).  Power overdraw (Section 4)

Sound Level

Sound level at 1 meter < 65db(A)

Control Interfaces

USB, RS-232, TCP, TTL

Warranty

24 months parts and labor

¹

The RETRA (L) light engine must be operated in a non-condensing environment.  

²

The corresponding number of days/months/years may vary considerably depending on the duty cycle implemented by 

the user and the prevailing environmental conditions during operation.

RETRA (L) Light Engine Manual 57-10025

17

lumencor.com

Summary of Contents for RETRA





















Reviews: