Regulatory Models
Lumencor utilizes regulatory model names for all certified and CE marked products. The regulatory model names are
traceable to all regulatory documentation, third party reports and certifications.
“
Regulatory Model: Retra III L
” is used as a representative model for all certified and CE marked RETRA (L) laser products.
Emissions
This equipment has been tested and found to comply with the limits of EMC directive 2014/30/EU and FCC part 15 (CISPR
11:+A1:2016). These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Safety Certifications
TUV SUD America, CB Certification (IEC 61010-1:2010)
TUV SUD America, NRTLus Certification (UL 61010-1:2012-05)
TUV SUD America, cNRTL Certification (CAN/CSA-C22.2 No. 61010-1:2012)
TUV SUD America, EN Certification (EN 61010-1:2010)
Underwriters Laboratories (UL), CB Certification (IEC/EN 60825-1:2014 Safety of laser products)
CE Marking
Low Voltage Directive (2014/35/EU)
EMC Directive (2014/30/EU)
RoHS Directive (2011/65/EU+2015/863/EU)
REACH Regulation (EC) No. (1907/2006/EC)
EU Declarations of Conformity can be found at
https://lumencor.com/company/compliance
For EU customers discarding end-of-life Lumencor electrical and electronic equipment: Please submit an RMA request with
“Recycle product under WEEE” in the Description of Issues field.
For disposal in countries outside of the European Union: This symbol is only valid in the European Union (EU). If you wish to
discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
Lumencor, Inc.
|
14940 NW Greenbrier Parkway | Beaverton, OR 97006 USA | 503.213.4269 |
Revision D
011822
RETRA (L) Light Engine Manual 57-10025
2
lumencor.com
Lumencor Light Engines as supplied, and as represented in this manual, meet safety and regulatory requirements
For
Research Use Only.
If the light engine is incorporated into an instrument or system for a specific end-use application,
it is the responsibility of the system integrator to verify that the light engine, and the system into which it is
incorporated, meet all safety and regulatory requirements of that end-use application.