17
5.4. Programming transducer parameters
Press and hold for about 3 seconds
key
to enter the programming matrix. If access is password protected,
transducer will ask for password. If the entered password is incorrect,
Err.Code
message will be displayed. Correct password enables
access to the programming matrix. Fig. 8 shows the matrix
in the programming mode. Use
or
to select
the menu level or navigate the parameters of a given sub-level.
The parameter symbol is displayed at the upper line of the display,
while the parameter is displayed at the lower line of the display.
Press
to edit parameter. Press
to cancel changing
parameter. Press and hold
to exit the programming matrix
and enter the measurement mode. If the transducer remains inactive
for 30 seconds in the parameter programming mode, it will exit the pro-
gramming mode and display the displayed value.
