61
61
5.5.5. riting and reading transducer configuration from file
P30U-X1XXXXXX and P30U-X2XXXXXX manufacturing
variants of P30U transducers enable storing and reading configuration
from the file located on an external SD/SDHC card or in the internal file
system memory.
5.5.5.1. Storing the transducer configuration file
To store the current transducer configuration, select
option:
Service
→
SaveFile
→
Yes
, from the menu
or enter “1” in register 4077. The text file with configuration
will be saved to
P30U
, folder, file name:
P30U_PAR.CON
(section 5.8.4. Fig. 27. ). Any subsequent saving the configuration file
will overwrite the current file.
5.5.5.2. Reading the transducer configuration file
Reading the transducer configuration from file enables quick
configuration of the transducer equipped with an external SD/SDHC
card or internal file system memory. The configuration file should be
located in
P30U
folder and its name should be
P30U_PAR.CON
.
The file can be generated by a properly configured P30U trans-
ducer or by eCon software (Modbus RS-485 or TCP/IP). In case of
transducers in P30U-X2XXXXXX manufacturing variant, the file
Fig.19. Algorithm of displaying two values with their units