BS305/BS340 25
Accessory for Circular Cutting(Option)
TABLE OF LOOSE PARTS
1.
Sliding bracket
2.
Centre pin
3.
Lock knob A
4.
Lock knob B
ASSEMBLY
Insert the centre pin into the hole of sliding bracket.
Fix it with the lock knob A.
Fix the sliding bar into the bearing bracket of the
upper guard assembly. Slide it to the desired position
and secure it with tightening the lock Knob B.
OPERATION
Attention:
To make a circular cutting, using a
possible narrow saw blade is necessary.
1.Draw a circle and its centre point on the wood
workpiece.
2. Set the fence to desired position where the saw
blade is inline to the tangent of the circle mark, while
the wood work piece is guided by fence. Turn on the
band saw and cut off the workpiece.
3.Put the remained workpiece with circle mark onto
the table. Align the point of tangency to saw blade
teeth. Set the centre pin inline to the circle centre, fix
these with tightening the knob A. Turn on the band
saw, slowly rotate and feed the workpiece to saw
blade.
4. You also can easily cut out round corner, sector with
the accessory.
1
2
3
4
A
B
