BS305/BS340 11
Assembly Instructions
– Loosen bolt C and adjust the guide bearing to
site 0.5mm away from the blade on either side,
and then tighten bolt C.
Adjusting the Lower Blade guide
This needs to be done after every blade change
and every tracking adjustment.
– Loosen Bolt D and position the guide bearing
so that it sits 1 – 2mm away for the cutting edge
of the blade, and then tighten bolt D.
–Loosen the socket head bolt E, and adjust trust
bearing to a position of 0.5mm from rear of
blade. Retighten the bolt E.
– Loosen bolt F and adjust the guide bearing to a
position 0.5mm away from blade. Retighten the
bolt F.
Dust Extraction
This machine has the option of attaching a dust
extractor or using the integrated dust collection
draw. The integrated dust draw will only collect
the debris which naturally filters down through the
machine and does not “suck” any dust away.
– Lift up dust port cover then insert firmly the
extractor hose into the port.
The dust draw collects any debris that falls down
through the machine and needs periodic cleaning
even when a separate dust extractor is used.
